Visit the whole site at: http://borg20011.tripod.com/borg_link_o_rama.htm
Disclaimer: Any of those modifications not performed by a knowledgeable mechanic
is your responsibility and yours only.
1-Speedo mods 2-Levers info 3-Small tips and torque specs 4-Weight saving 5-Spring rates
6-Rear ride height 7-Cheap rearsets 8-Can a frame be repaired? 9-Sparker racing doc.
10-Clutch boss retaining ring removal procedure. 11- Swingarm bearings part #
12- Marchesini wheels bearings part #
1-Cam timing 2-Milling the head/YEC head gasket part#/YEC racing ignition boxes part#
3-Milling the deck 4-Cooler motor temps 5-High compression motors 6-More air under the tank
7-Porting 8-Ramair 9-Velocity stacks 10-Crankcase relief valve 11-Spark plugs.
Nitrous tuning and info.
1-Exhausts gas analyzers 2-Nitrous stuff 3-Ignition box mods 4-Trick radiators
5-Fan override switch (updated) 6-Mods info 7-Battery care 8-Anodize tips 9-Storage
10-Carbs balancing 11-Carbs cables tips 12-Brake bleeding tips 13-Wheels weight
14-Ohlins info 15-Scotts damper settings 16-D-rings 17-Undertail tips
18-Chain alignment tips 19-carbon bodies tips 20-Stickers application/removal tips
21-Better shifting 22-Oils and TPS specs + link to how to adjust it
Micro-fiches page (in jpg format).
1-YEC parts catalog 2-Gearing changes charts 3-The back pressure myth
4-Shift-shaft problems 5-Temperature switch modification 6-Aluminum polishing
7-Headlights modulator url 8-Relay for 4 flashers with LEDs
9-02 R1 yellowbox install 10-Hard starting? 11-Adjusting air/fuel mixture on EFI R1`s.
12-Yellow box installation on a 04 R1 by Glenn Hall (GRH)
RAMAIR JETTING!!!
1-Useful tools 2-Interesting rear wheel alignment tool 3-Front caliper spacer for oversized discs
4-Airbox modification(98-01) 5-Fuel level sensor mod 6-Wheels weights figures and tips.
7-Throttle tube modification 8-How to use a torque wrench with a c-spanner wrench
How to shim needles and install jetkits by Nubian with personal notes.
How to test a rectifier/regulator, information and how to install a fan for cooler operation.
Maps for 02-03-04 fuel injected R1 and R6.
The steps to build a 190 rwhp engine.
1-How to de-restrict 98-01, 02-03 and 04 R1`s
2-02 AIS removal procedure with pics (2 different topics)
3-02 airbox inlet modification 4-00-01 Tach cluster installation on 98-99
5-How to read a dyno chart 6-Where to get switched current
02-03 ECU diagnostic codes
How to repair a Techtronics quick-shifter rod
2002/2003 R1/R6 YEC racing parts
Running lights signals in headlamps (Understanding of a relay).
How to synchronize throttle bodies and carburetors
1-Brake fluid boiling point chart 2-Carbs 101: General overview
3-Digi setup procedure 4-Autozone fan switch part #
5-Lack of charge (Updated) 6-Smoother clutch action 7-TPS adjustment trick
8-How to clean the combustion chambers and pistons tops
9-Tuning air/fuel ratio with a Dynotune digital meter
10-Digi install procedure on a 04 R1 by Glenn Hall (GRH)
1-Parts and service manuals for all years R1 (on hold for now)
1-Pads and discs break-in procedure 2-horsepower and torque
Work in progress + some recent pics of my bike
MORE TO COME!!!